Last Modified: 11-29-2007 1.6 A
Service Category: Drivetrain Section: Transfer/4wd/Awd
Model Year: 2008 Model: Sequoia Doc ID: RM0000030J0007X
Title: JF3A TRANSFER / 4WD / AWD: 4WD CONTROL ECU: INSTALLATION (2008 Sequoia)

INSTALLATION

1. INSTALL 4WD CONTROL ECU

(a) Install the ECU with the bolt.

Torque: 8.0 N·m (82 kgf·cm, 71 in·lbf)

(b) Connect the 2 ECU connectors.

2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY RH INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: INSTALLATION (2008 Sequoia)+

3. INSTALL INSTRUMENT SIDE PANEL RH INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: INSTALLATION (2008 Sequoia)+

4. INSTALL COWL SIDE TRIM BOARD RH

(a) Install the cowl side trim board RH ().

HINT:

Use the same procedures described for the LH side.

5. INSTALL FRONT DOOR SCUFF PLATE RH

(a) Install the front door scuff plate RH ().

HINT:

Use the same procedures described for the LH side.